Kramer SV-551 SummitView™
Processor/Switcher & Room Controller
Prisen gjelder så lenge lageret rekker
Quick Facts
- 5 video with audio input (3 VGA or YUV with audio & 2 CV or s-Video with audio)
- DDC support for VGA
- Aux Line Input - Mix mic or other audio
- Controlled by - Ethernet, RS-232, 10K volume level, RC-62 & RC-63 controllers
- K-Net Control Channel provides power and control data to the controllers over a single cable
- Room Control Ports - 2 RS-232, 1 RS-485, 1 IR, IR out on video wall plates, 2 relays, & Ethernet
- Mounts in optional mounting kit above the ceiling mount projector or in a rack.
The SummitView SV-551 processor/switcher is the heart of the system for audio and video signal distribution and room control. From one or more wall plate room controllers, the SV-551 switches up to five audio and video sources to a large screen display in their native formats, amplifies the audio to a pair of speakers, and controls room facilities such as lights and a screen.
Spesifikasjoner (Se produktlink for detaljer)
Video Inputs - 5 total. 8 RJ-45 from 5 wall plates via CAT 5, 3 computer graphics or component video, 3 DDC and 2 composite or s-Video.
Video Outputs - 15-pin HD (for computer graphics video), 3 RCAs (for component video), 2 RCAs (for 2 composite video) and 4-pin (for s-Video).
Audio - S/PDIF or unbalanced stereo audio (from the wall plate input module) is output (with optional tone control) to a balanced amplified stereo audio speaker output and audio line out on a terminal block connector.
AUX Audio Input - Mix an additional audio source such as a microphone at line level.
Flexible Control Options - SummitView controllers (RC-62 & RC-63) via K-Net™ channel. Also supported: Ethernet, RS-232, 10kOhm volume control and front panel switching.
K-Net Control Channel - Provides power and control data to the wall plate controllers over a single cable.
Power Connect™ System - Power to the wall plate input units is provided by the SV-551 via the CAT 5 cable.
Control Ports - Control AV equipment with 2 RS-232, 1 RS-485, 1 IR, 2 relays, and Ethernet ports.
Remote Volume Control - Adjusts volume from an RC-63 controller.
Internal Clock - Schedule recurring tasks, define system shutdown timer for economic operation, and more.
1 USB - For programming.